The working principle of gear oil pump in marine pumps is that two gears rotate with each other, and there is not much requirement for the medium. The general working pressure is below 600Pa and the flow rate is relatively high. The gear oil pump of a marine pump is equipped with two rotating gears, one driving the other. The working part of the gear oil pump is divided into two independent parts through the mutual meshing of two gears. These two parts are divided into the suction chamber and the discharge chamber. When the gear oil pump is running, a partial vacuum is formed in the suction chamber, and the liquid is sucked in. When the liquid fills the entire gear, it is turned to the discharge chamber to discharge the liquid from the pump body.

Characteristics of gear oil pump:

1. This institution is relatively compact, easy to operate, and easy to maintain

2. It has strong absorption capacity, so it can absorb on its own without filling with liquid. Good lubrication effect can be achieved when transporting liquids, and no additional lubricant is needed during normal operation

Gear oil pumps can be used in various applications such as medical machinery, building materials equipment, petrochemicals, etc

Suitable for transporting liquids without solid particles, non corrosive, and at temperatures below 150 ℃. Suitable for insulation at room temperature or low temperature.